electrodes and electrode holders

electrodes and electrode holders

Category: Amplifiers, Stimulators, Data Acquisition, Electrophysiology

electrodes and electrode holders (Under certain situations, we can custom modify any of our products to meet your needs. Please contact our sales staff for further information).

Epoxy-Insulated Microelectrodes

Parylene-C Insulated Tungsten Microelectrodes

Silver/Silver Chloride Electrodes

Stimulating Electrodes

Suction Electrode

Calibrated Suction Source

-

Epoxy-Insulated Microelectrodes are consistently high-quality electrodes available in either Stainless Steel or Tungsten. We know that electrodes are difficult to manufacture, therefore we take extra care to monitor each step of microelectrode fabrication. Microscopic inspections are performed and microelectrode resistance and capacitance are checked to ensure insulation integrity and proper electrode impedance.

Metal electrode impedance is measured with a 2 nAp-p current at 1 kHz. The tolerance range for 5M epoxy-insulated microelectrodes is 3M to 8M, and the tolerance range for 12 M epoxy-insulated microelectrodes is 10M to 18M. We skew the values a little high because it is possible to lower the impedance at a later stage by passing current through the electrode.

Metal electrodes do not behave as resistors due to polarization. They have low series resistances for high frequency signals and high series resistance for low frequency signals. For example, for DC inputs a typical tungsten microelectrode will have a series resistance of about 200Mohms. However, for a 1kHz sine input, the same electrode will have an impedance of 1Mohm. Its impedance will further drop to only 100kohm for a 100┬Ás pulse.
AddThis Social Bookmark Button

Download PDF catalogue

Catalogue download

KF Technology S.r.l. - Via A.Bocchi, 84 00125 Roma - tel. 06 45434179 - fax 06 97253131 - Cell. 339 5330322 - info@kftechnology.it - P.IVA 07080681005

LiveZilla Live Chat Software